SURGEx-CS Series

Water Hammer Arresters, Series CS

SURGEx-CS SeriesSURGEx-CS series is a piston operated, water hammer arrester fabricated from hard drawn seamless copper with SWEAT  end connections. SURGEx-CS arresters are available in sizes from 1/2" to 1". SURGEx-CS is complying with the most updated international standards and requirements related to the design and manufacture of water hammer arresters.

FEATURES AND BENIFITS
  • Seamless body fabricated from hard drawn copper to guarantee the smooth movement of the piston at all time.
  • Designed for installation with no access panel required.
  • May be installed in new or existing domestic and commercial plumbing systems with a standard pipe tee.
  • Factory pre-charged at 60 PSI (4.2 BAR) and hermetically sealed. No need to charge it after installation.

SURGEx

SURGEx

CS15-A

CS20-B

CS25-C

CS25-D

CS25-E

CS25-F

Fixture Unit

1-11

12-32

33-60

61-113

114-154

155-300

PDI Symbol

A

B

C

D

E

F

A Connection

INCH

½”

¾”

1”

1”

1”

1”

MM

15

20

25

25

25

25

B Height

INCH

8¼”

10”

12½”

11”

13½”

16”

MM

210

254

317.50

279

343

406

C Diameter

INCH

1⅛”

1⅛”

1⅜”

2⅛”

2⅛”

2⅛”

MM

28.58

28.58

34.93

54.00

54.00

54.00

Note: Dimensions listed are approximate and for reference only. Accurate measurements can be obtained or confirmed from Fluidex technical support.

SURGEX-CS series is a pre-charged, piston operated, surge pressure absorber (also called water hammer or surge arrester). SURGEx-CS series is fabricated from hard drawn copper and fitted with a PP piston. SURGEX-CS has SWEAT end connecions.

MATERIALS OF CONSTRUCTIONS
  • Body: Hard drawn seamless copper barrel
  • Piston: PP
  • O-ring: EPDM
  • Seal Lubricant: Dow-Corning Silicone compound, FDA approved for use in potable water systems

OPERATING CONDITIONS

  • Pressure range: Up to 350 PSI (24 BAR)
  • Temperature range: 33°F to 250°F (0.5°C to 121°C)